Table of ContentsPreviousNextSearch Knowledge Base

Complete PDF manual
PDF of this chapter


Deactivating a VPN Tunnel

Sometimes a VPN tunnel must be deactivated for testing purposes. There are two ways to deactivate a VPN tunnel:

Using the Policy Table on the VPN Policies Page to Deactivate a VPN Tunnel

To use the VPN Policies page to deactivate a VPN tunnel, perform the following steps:

  1. Log in to the Modem Router.
  2. Open the DG834G v3 management interface and click on VPN Policies to get the VPN Policies screen (Figure 7-36).

    Figure 7-36

  3. Clear the Enable check box for the VPN tunnel you want to deactivate and click Apply. (To reactivate the tunnel, check the Enable box and click Apply.)

Using the VPN Status Page to Deactivate a VPN Tunnel

To use the VPN Status page to deactivate a VPN tunnel, perform the following steps:

  1. Log in to the Modem Router.
  2. Open the DG834G v3 management interface and click on VPN Status to get the VPN Status/Log screen (Figure 7-37).

    Figure 7-37

  3. Click VPN Status (Figure 7-37) to get the Current VPN Tunnels (SAs) screen (Figure 7-38). Click Drop for the VPN tunnel you want to deactivate.

    Figure 7-38


NETGEAR, Inc.
http://www.netgear.com
Table of ContentsPreviousNextSearch Knowledge Base 202-10155-01, October 2006