Table of ContentsPreviousNextIndexSearch Knowledge Base

Complete PDF manual
PDF of this chapter


Advanced-Port PVID Configuration

The Port PVID Configuration screen lets you assign a port VLAN ID (PVID) to an interface. There are certain requirements for a PVID:

To configure PVIDs:

  1. Select Switching > VLAN > Advanced > Port PVID Configuration. A screen similar to the following displays.

    Figure 4-13

  2. You can make changes to the port PVID settings for an individual port or for a group of ports:
    • To change the port PVID setting for an individual port, select the check box to the left of its port number, and then enter an existing VLAN ID in the PVID field.

      Note: You can also enter the interface number (that is, the port number) in the GO TO INTERFACE field, and then click GO.
    • To change the port PVID settings for a group of ports, select the check boxes to the left of their port numbers, and then enter an existing VLAN ID in the PVID fields.
    • The following information about the port PVID settings is displayed:

    • PVID. Specifies the ID of an existing VLAN.
  3. Click Apply to confirm any settings changes.

NETGEAR, Inc.
http://www.netgear.com
Table of ContentsPreviousNextIndexSearch Knowledge Base