Table of ContentsPreviousNextSearch Knowledge Base

Complete PDF manual
PDF of this chapter


Logging in Using the Default IP Address

The default IP address of your access point is 192.168.0.228. The WG302 is set, by default, with the DHCP client disabled.

Note: The computer you are using to connect to the WG302 should be configured with an IP address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0.

  1. Open a Web browser such as Internet Explorer or Netscape Navigator.
  2. Connect to the WG302 by entering its default address http://192.168.0.228 into your browser.

    Figure 2-5.

  3. The login screen will display. Enter the default user name of admin and default password of password to log in.

    Figure 2-6.

  4. Click Login now.
  5. Once you have entered your access point name, your Web browser will automatically locate the WG302 Wireless Access Point and display the home page screen, as shown in Figure 2-2..


NETGEAR, Inc.
http://www.netgear.com
Table of ContentsPreviousNextSearch Knowledge Base 202-10008-04, April 2006