Complete PDF manual
PDF of this chapter

Using the Reset Button to Reboot or Restore Factory Defaults

If you don't have the login password or the IP address of the wireless access point, you can use the default Reset button on the bottom of the device. The reset button has two functions:

Reboot. When pressed and released quickly, the wireless access point will reboot (restart).
Reset to Factory Defaults. When held down for at least 10 seconds (until the LED blinks rapidly), you can clear all data and restore all settings to the factory default values.

To clear all data and restore the factory default values:

Use something with a small point, such as a pen, to press the Reset button in for at least 10 seconds (until the LED blinks rapidly).
Release the Reset button.

The factory default configuration has now been restored, and the WG602v4 is ready for use.

202-10279-01, June 2007