Table of ContentsPreviousNextIndexSearch Knowledge Base

Complete PDF manual
PDF of This Chapter


Logging Into Your Router

To log into your router after you have configured your router, do the following:

1. Type http://www.routerlogin.net in the address field of Internet Explorer or NetscapeŽ Navigator.

Figure 3-3: Log in to the router
2. When prompted, enter admin for the router user name and password for the router password, both in lower case letters (or enter the password you chose if you changed it during the setup in "Initial Configuration" on page 3-2).

Note: The router user name and password are not the same as any user name or password you may use to log in to your Internet connection.

A login window like the one shown below opens:

Figure 3-4: Login window
3. Click OK and the resulting window below appears:

Figure 3-5: Login result
4. Enable the Firmware Upgrade Assistant if you want the router to check for the lastest firmware every time you log into the router (otherwise, you can check yourself manually; see "Upgrading the Router Software" on page 5-5).

Figure 3-6: Firmware Upgrade Assistant popup and screen

NETGEAR, Inc.
http://www.netgear.com
Table of ContentsPreviousNextIndexSearch Knowledge Base