Table of ContentsPreviousNextIndexSearch Knowledge Base

Complete PDF manual
PDF of this chapter


Push Button Configuration

To enable a wireless client to join a network using the menu options in the router's menu:

  1. Log in to the router.
  2. Select Add WPS Client in the main menu, and click Next.
  3. Select the Push Button setup method.

    Figure 2-6

  4. Press the dome on the WNDR3300 router for over 5 seconds, or click the button in the Add WPS Client screen.
  5. The dome lights begin to blink in a regular pattern. While the dome lights are blinking, you have 2 minutes to enable WPS on the device you are trying to connect to the router.

  6. On the wireless client, press the hardware button, or click the button in the Add WPS Client screen.
  7. The WNDR3300 router's dome lights cease blinking when one of these conditions occurs:

    • The router and the client establish a wireless connection.
    • The 2-minute window period expires for establishing a WPS connection. If the connection is not established, no WPS security settings will be configured in the WNDR3300 router.

NETGEAR, Inc.
http://www.netgear.com
Table of ContentsPreviousNextIndexSearch Knowledge Base 202-10301-01, February 2008