Table of ContentsPreviousNextSearch Knowledge Base

Complete PDF manual
PDF of This Chapter


Using the Web Browser Interface

You can use a web browser to log in to a WNHDE111 and view or changes its settings. To access the web browser interface:

  1. When connected directly to the unit via an Ethernet cable, you can open the web browser interface by typing http://www.mywifiext.net in the address field of your browser, and then press Enter. The login window above opens:
  2. Enter password for the password.
  3. The Checking for Firmware Updates screen appears unless you previously cleared the Check for New Version Firmware Upon Log-in check box in the Firmware Update screen.

    If the unit discovers a newer version of software, you are asked if you want to upgrade to the new software is available, the no new firmware message displays.

    Figure 3-12

    Note: If the Check for New Version Upon Log-in check box is selected, the home page is the Firmware Version Check screen. Otherwise, it is the Setup Wizard screen.

    If the unit is connected to the Internet, you can select Knowledge Base or Documentation under Web Support in the main menu to view support information or the user manual.

    If you do not click Logout, the unit will wait for 5 minutes after no activity before it automatically logs you out. You can adjust this timeout setting on the Tools Admin page.


NETGEAR, Inc.
http://www.netgear.com
Table of ContentsPreviousNextSearch Knowledge Base 202-10300-01, May 2008