|
|
Table of Contents
WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
Unpacking Your New Wireless-N AccessPoint/Bridge
Back Panel Connectors, Buttons, and Switches
Key Back Panel Label Information
Chapter 2 Easy Secure Wireless Setup
What If Some of My Devices Don't Support WPS?
WPS PIN Entry Setup of WIreless Clients
Setting Up a Pair of WNHDE111 Units at Once
Adding a Second WNHDE111 to Your Network Later
Connecting Other Devices to a WNHDE111
Using the Smart Wizard Configuration Assistant
Using the Web Browser Interface
Using Automatic Firmware Update upon Login
Chapter 4 Securing My Wireless
Choosing Appropriate Wireless Security
Changing Wireless Security Settings
Viewing Basic Wireless Settings
Configuring WEP Wireless Security
Configuring WPA Wireless Security
Viewing Advanced Wireless Settings
Using Push 'N' Connect (Wi-Fi Protected Setup)
Using the Physical Push Button
Using the Wireless Client's Security PIN
Connecting Additional Wireless Client Devices after WPS Setup
Adding Additional WPS-Enabled Clients
Adding Additional Non-WPS-Enabled Clients
Restricting Wireless Access by MAC Address
Changing the Administrator Password
Chapter 5 Customizing Your Wireless Network
Using the Network Settings Options
Configuring the Access Point Parameters
Wireless Repeating (Also Called WDS)
Chapter 6 Fine-Tuning Your Network
Optimizing Wireless Performance
Wireless Intelligent Stream Handling (WISH)
Using WMM QoS for Wireless Multimedia Applications
Chapter 7 Using Network Management Tools
Viewing Status and Log Information
Viewing a List of Attached Devices
Managing the Configuration File
Backing Up and Restoring the Configuration
Upgrading Automatically to New Software
Upgrading Manually to New Software
Be sure to restart your network in this sequence.
Make sure that the Ethernet cables are securely plugged in.
Make sure that the wireless settings in the computer and WNHDE111 match exactly.
Make sure that the network settings of the computer are correct.
Troubleshooting Basic Functions
The Power light is not on or is blinking.
The Wireless or Ethernet port lights are not on.
Troubleshooting the Web Configuration Interface
Restoring the Default Configuration and Password
Appendix A Technical Specifications
Default Configuration Settings
Restoring the Default User Name and Password
|
NETGEAR, Inc. http://www.netgear.com |
|
202-10300-01,
May 2008 |