Table of ContentsPreviousNextIndexSearch Knowledge Base

Complete PDF manual
PDF of this chapter


Appendix A
Technical Specifications

Default Configuration Settings

This appendix provides factory default settings and technical specifications for the RangeMax Wireless-N Gigabit Router WNR3500.

Table A-1. WNR3500 Router Default Configuration Settings 
Feature
Default Setting
Router Login
 
Router Login URL
http://www.routerlogin.net or
http://www.routerlogin.com
Login Name (case-sensitive) printed on
product label
admin
Login Password (case-sensitive) printed on
product label
password
Internet Connection
 
WAN MAC Address
Default hardware address (on label)
MTU Size
1500
Local Network
 
Router LAN IP address printed on product label
(also known as Gateway IP address)
192.168.1.1
Router Subnet
255.255.255.0
DHCP Server
Enabled
DHCP range
192.168.1.2 to 192.168.1.254
Time Zone
GMT
Time Zone Adjusted for Daylight Saving Time
Disabled
Allow a Registrar to configure this router
Enabled
Wireless
 
Wireless Communication
Enabled
SSID Name
NETGEAR
Security
Disabled
Wireless Access List (MAC Filtering)
All wireless stations allowed
Broadcast SSID
Enabled
Transmission Speed
Auto1
Country/Region
United States (North America only; otherwise varies by country and region)
RF Channel
6 until region selected
Operating Mode
145 Mbps
Data Rate
Best
Output Power
Full
Firewall
 
Inbound (communications coming in from the Internet)
Disabled (bars all unsolicited requests except for traffic on port 80, the http port)
Outbound (communications going out to the Internet)
Enabled (all)
1Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate.


NETGEAR, Inc.
http://www.netgear.com
Table of ContentsPreviousNextIndexSearch Knowledge Base 202-10305-01, March 2008